Interior

Carbon Beach | Malibu Commercial Painting Project

Carbon-Beach-7.jpg

Maxson Painting came on the job to finish up the interior and exterior painting after earlier challenges led to a change in painting contractors. Our responsibility was to go over every surface and insure that the highest quality finishes were achieved. Detailed sanding, patching and finishing done over finished hardwood flooring in fully furnished homes was no problem for our team. The time frame was critical as the condos were going on the market very soon. Maxson Painting work closely with the construction superintendant and in harmony with the other tradesmen to meet the opening date requirement.
[Best_Wordpress_Gallery id="4" gal_title="Carbon Beach"]

Pro Tips: Why is My Paint Peeling and How Can I Fix It?

paintpealing.jpg

In our Pro Tip Series we attempt to answer frequent questions that homeowners have.

In today's post we tackle the question: Why is the paint peeling off my doors and trim?

There could be any number of reasons for this surface condition, the most common cause tends to be water-based paint having been applied over oil based paint.  Water-based paints have a lot of great qualities, sticking well over oil based paint just isn't one of them. This can be a real challenge to repair, but it can be fixed if you take the right steps.

What are those right steps you ask? Well that’s a great question and I’m glad you asked.

The first step is to check and see how well the paint is sticking. Meaning, it is not coming off easily when scratched with your fingernail. In the best case scenario the paint is still sticking fairly well.

If this is the case follow these steps:

  • Lightly sand the failing paint
  • Apply a coat of oil based primer on top of the water based paint.
  • Next lightly sand the primer to get a smooth surface
  • Finally apply two coats of quality semi-gloss enamel and you're done

If the paint scratches off easily with your fingernail, you will need to follow these steps:

  • First remove all loose and failing paint using a stiff putty knife, paint scraper and sandpaper. 
  • Once this has been accomplished sand the surfaces thoroughly
  • Apply a coat of oil based primer 
  • Next lightly sand the primer to get a smooth surface
  • Lastly apply two finish coats of quality semi-gloss enamel.

Ventura Painter

 

If you just hate the idea of using oil based primer, check with your local paint store and explain the situation. Depending on where you live they may have a water-based primer that will do the job for you. Good luck with your painting project!

 

Your friendly professionals at Maxson Painting